Able to log from Innovate Motorsports 2.Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.Standalone datalogs to microSD / microSDHC card without a laptop.J2534 PassThru support with Windows DLL.K-line (ISO9141/ISO14230(KWP2000)/dual K line) Technical Details 72Mhz 32-bit processor USB 2.0 full speed device (USB-A/Mini cable included) Field upgradeable software Supports these major OBD protocols: CAN 2.Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line). From plus C12 to pin 53 (P2 10 /EINT0) LPC2364, added a 10 k resistor. On pins 1 and 3 of LD33, added an electrolytic capacitor of 100 uF, 25 V. To capacitor C8, soldered a ceramic capacitor of 10 uF 2). The OEM software we have test on TOYOTA ,LAND ROVER and JAGUAR are all excellent. In sum in order to replacing the resistors on the Tactrix Openport 2.0 Clone, you can do the following: 1). USB 2.0 full speed device (USB-A/Mini cable included) Tactrix Openport 2.0+ can work for Toyota, Jaguar and LandRover diagnostics.
Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters.
We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface.
0 kommentar(er)
